Universal - for lifting in any directionWelded alloy steel body for strength and smaller size. Forged alloy components, where requiredIndividually Proof Tested to 2 times the Working Load Limit with certificationWorking Load Limit and jaw opening permanently stamped on bodyEach product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clampIP10 - Standard clamp for materials with a surface hardness to 363HV10 (345 HB)Full 180° turning range for material transfer, turning or movingLock open, lock closed ability with latch for pretension on material and then release of materialFor use with materials with a surface hardness to 279HV10. Only 5% minimum WLL is neededMaintenance and repair kits are availableManufactured by an ISO 9001 facilityAll sizes are RFID EQUIPPEDMinimum WLL is 5% of maximum WLL for .5t IP10 onlyMinimum WLL is 10% of maximum WLL all other IP10, IP10J, IP10S, IP10H clamps.
Capacities 1/3 through 150 metric tons.WLL and grade '6' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26Look for the Red Pin® . . . the mark of genuine Crosby quality.
Capacities 1/3 through 150 metric tons.WLL and grade '6' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26Look for the Red Pin® . . . the mark of genuine Crosby quality.
Capacities 1/3 through 150 metric tons.WLL and grade '6' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26Look for the Red Pin® . . . the mark of genuine Crosby quality.
Capacities 1/3 through 150 metric tons.WLL and grade '6' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26Look for the Red Pin® . . . the mark of genuine Crosby quality.
Capacities 1/3 through 150 metric tons.WLL and grade '6' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26Look for the Red Pin® . . . the mark of genuine Crosby quality.
Capacities 1/3 through 150 metric tons.WLL and grade ''6'' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26
Capacities 1/3 through 150 metric tons.WLL and grade ''6'' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26
Capacities 1/3 through 150 metric tons.WLL and grade ''6'' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26
Capacities 1/3 through 150 metric tons.WLL and grade ''6'' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26
Capacities 1/3 through 150 metric tons.WLL and grade ''6'' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26
Capacities 1/3 through 150 metric tons.WLL and grade ''6'' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26
Capacities 1/3 through 150 metric tons.WLL and grade ''6'' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26
Capacities 1/3 through 150 metric tons.WLL and grade ''6'' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26
Capacities 1/3 through 150 metric tons.WLL and grade ''6'' permanently shown on every shackle.Forged - Quenched and Tempered, with alloy bolts.Hot Dip Galvanized or self coloured.Fatigue rated (1/3t to 55t)Shackles 25t and larger are RFID equipped.Shackles 85t and larger are proof tested to 2x WLL.Approved for use at -40° C (-40° F) to 204° C (400°F)Meets or exceeds all requirements of ASME B30.26
