Help us to understand our customers even better by taking part in our quick - About You Survey

Barrel lifting clamp

Barrel lifting clamp

Barrel lifting clamp

S.164988

Weight: 7.25kg
Stock Check
Universal - for lifting in any direction
Welded alloy steel body for strength and smaller size. Forged alloy components, where required
Individually Proof Tested to 2 times the Working Load Limit with certification
Working Load Limit and jaw opening permanently stamped on body
Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clamp
IP10 - Standard clamp for materials with a surface hardness to 363HV10 (345 HB)
Full 180° turning range for material transfer, turning or moving
Lock open, lock closed ability with latch for pretension on material and then release of material
For use with materials with a surface hardness to 279HV10. Only 5% minimum WLL is needed
Maintenance and repair kits are available
Manufactured by an ISO 9001 facility
All sizes are RFID EQUIPPED
Minimum WLL is 5% of maximum WLL for .5t IP10 only
Minimum WLL is 10% of maximum WLL all other IP10, IP10J, IP10S, IP10H clamps.
View Product Specifications
up
down
View Suitable For View OEM Part Numbers
Product Specifications

Specifications

Universal - for lifting in any direction
Welded alloy steel body for strength and smaller size. Forged alloy components, where required
Individually Proof Tested to 2 times the Working Load Limit with certification
Working Load Limit and jaw opening permanently stamped on body
Each product is individually serialized, with the serial number and Proof Load test date stamped on body. User manual with test certificate is included with each clamp
IP10 - Standard clamp for materials with a surface hardness to 363HV10 (345 HB)
Full 180° turning range for material transfer, turning or moving
Lock open, lock closed ability with latch for pretension on material and then release of material
For use with materials with a surface hardness to 279HV10. Only 5% minimum WLL is needed
Maintenance and repair kits are available
Manufactured by an ISO 9001 facility
All sizes are RFID EQUIPPED
Minimum WLL is 5% of maximum WLL for .5t IP10 only
Minimum WLL is 10% of maximum WLL all other IP10, IP10J, IP10S, IP10H clamps.
Crosby
A (mm)
300
B (mm)
375
Brand
Crosby
C (mm)
290
D (mm)
100
E (mm)
50
F (mm)
12
Reference
2700118
Safe working load (Tons)
0.5
Tariff Code
8431200080
Type
Barrel Lifting
Comparison Table
Suitable For Make/Model

Suitable For Make/Model

This product is not associated with any particular make or model
OEM Part Numbers

Oem Part Numbers

This product is not associated with any particular OEM part number
Catalogue Pages

Catalogue Pages

This product does not appear in any Sparex printed catalogues